Click
to E-mail us!
|
Click
to E-mail us! |
|
|
NOTE: Pricing.2 Two prices are shown. The first is for countries within the EEC and includes VAT. The second is for countries outside the EEC and excludes VAT.
SECTION
C:(Click the blue for images)
BEARINGS, FRONT ENDS & HARDWARE
C2 Micro X Thrust Bearing.
Single hole, weight approx. 0.00075oz. General
indoor use.
£0.80 / £0.68
C3 Micro X Ultra Bearing.
Single hole, lighter than C2 for light indoor
models.
Weight approx. 0.0005oz. £1.20
/ £1.02
C4 Micro X Mini Bearing.
As C3 but lighter still, for small
very light indoor models.
Weight approx. 0.0004oz. £1.20
/ £1.02
C5 Micro X Dual R/H Bearing.
Long enough for rubber clearance,
double hold keeps vibration
to minimum for extended flight times.
Weight approx.0.0006oz.
£1.60
/ £1.36
C6 Ray Harlan Dual R/H Pigtail Bearing.
Beautifully made tiny dual bearing
for Easy Bee, F1D etc.
with proper pigtail slot for positive
lock. £2.50
/ £2.13
C7 Ray
Harlan Dual R/H Penny Plane Bearing.
Slightly thicker than the Easy Bee
bearing to cope with the larger
model. £2.50
/ £2.13
Peck Polymer
Nylon Nose Bearings
C9 1/32” shaft size. Pk 6. £2.00
/ £1.70
C9a Same size as C9 but with 3/64 hole, Pk 6. £2.00
/ £1.70
C10 3/64” shaft size. Pk 6. £2.00
/ £1.70
F.A.I.
Ball Bearing Thrust Bearings
Eight 1/16”
steel balls assembled in machined bronze faces.
Precision smooth
running, long life, 3 sizes.
C16 1/16" hole dia. (16 swg, 1.57mm approx.)
£4.50 / £3.83
C17 2mm hole dia. (14 swg, approx.) £4.50
/ £3.83
C18 3/32" hole dia. (2.37mm approx.) £4.50
/ £3.83
Micro
X Teflon Washer Packs
Place between nose
bush and rear of prop to reduce friction.
C19 Standard. Pk 12. £2.50
/ £2.13
C20 Ultra 0.070 od x 0.014 id (EZB). Pk 12. £2.50
/ £2.13
C21 Flying Scale, Peanut, etc.1/8" od x 1/32
id. Pk 12. £2.50 / £2.13
C22 Brass washers 3/64" (18 swg). Pk 12. £2.00
/ £1.70
Teflon
Washers
A range of larger
Teflon washers to replace the old cup washers.
Per dozen:
C23 3/16 x 035" (Drill out to suit 18 swg/3/64). £2.50
/ £2.13
C26 1/8 x 1/32". £2.50
/ £2.13
C27 Ultra .024 id x .100 od. £2.50
/ £2.13
C28 1/4 x 1/16" (16 swg). £2.50
/ £2.13
C29 1/4 x 3/32". £2.50
/ £2.13
Glass
& Hard plastic bead bearings
C30 Glass Beads .060 od x .015 id (12). £1.10
/ £0.94
C30a Bead for 22 SWG wire (12). £1.10
/ £0.94
C30b. Bead for 025 wire (12). £1.10
/ £0.94
C30c. Bead for 1/32" wire (12). £1.10
/ £0.94
C30d. Bead for 3/64" wire (12). £1.10
/ £0.94
F.A.I.
Front End Assemblies
Comes complete
with plastic covered hook, bronze bearing,
tension spring,
nose bush and long shaft.
C31 2mm shaft. Wakes ,etc. £6.95
/ £5.91
C32 1/16" shaft. Coupe ,etc. £6.95
/ £5.91
C32a 3/32”. £6.95 / £5.91
Pre
Drilled Prop Hubs
Save hours of labour.
Machined hard alloy, pre-drilled ready to finish.
C33 Wakes etc. 2" long, 3/4" wide,
1/2" thick. £3.95 /
£3.36
C34 Wakes etc. 1 3/4" long, 3/4" wide,
1/2" thick. £3.95 / £3.36
F.A.I.
Hardware Shaft Bushing
Hard alloy, 3/8"
face, 1" shaft, not threaded.
C36 Hole size 2mm. £1.95
/ £1.66
C37 As C36, 1/16" hole. £1.95 / £1.66
C38 Tension spring for prop shafts, 1/2" long, 3/16"od.£0.90 / £0.77
SAMS Brass
Threaded Nose Bushes
C40 14 swg (2mm approx.) £0.75
/ £0.64
C41 16 swg (1/16" approx.) £0.75
/ £0.64
C42 18 swg (0.045 approx.) £0.75
/ £0.64
Alloy Bobbins
Very light.
Dimensions:
C43 3/4" dia x 1/4" wide x 1/4" hole. £1.20
/ £1.02
C44 3/4" dia x 1/4" wide x 1/8" hole. £1.20
/ £1.02
C45 3/4" dia x 3/8" wide x 1/4" hole. £1.20
/ £1.02
C46 3/4" dia x 3/8" wide x 1/8" hole. £1.20
/ £1.02
C54 Prop Hanger – 1/32"
shaft 3/16" stick. Pk 3. £2.00
/ £1.70
C58 Kalina Profile bearing. Alloy
hook bearing for profile models.
Can
be easily bent to adjust side or down thrust. 1/2” long x
1/4”
wide. £1.50 / £1.28
K
& P Adjustable Nose Bearing
C59 Adjust both side and down thrust
before locking permanently.
Clever
design allows any combination of thrust line to be tried
before
final gluing in place. Packet of one. £2.00
/ £1.70
C59a As above but packet of 2. £3.00 / £2.55
We accept cheques
(UK only), Eurocheques, International money orders, Travellers Cheques, Cash
(UK and USA notes), and these credit cards:
Visa, Mastercard, American Express, Solo, Delta, and
Maestro/Switch.
Please note. Except for the Handbook, we only accept credit cards for orders
above £5.00.
|
| Last
Revision: April 17th 2008 |
 |
 |
