SAMS Model Catalogue

View Basket | Checkout | Items:, Value:

Product Sections

spacer
spacer

Store Information

spacer
spacer

Best Sellers

F84. KP01 Li Poly Free Flight Electric motor system

F84. KP01 Li Poly Free Flight Electric motor system

Set now includes Motor/Gerbox , Speed controller / timer - Li Poly Battery and 2 props. Ready to install in bulkhead. Models up to 4 1/2 oz.



UK ONLY. THIS CANNOT BE SENT OVERSEAS WITH THE BATTERY

find out more

35.75

H15. Pin Clamps. Pack 28

H15.  Pin Clamps. Pack 28

These are probably the most popular item we sell. Allows
you to hold wood in place without putting pins through the
wood. Packet of 28. Use with H17 below.

find out more

2.00

H1a. Extra keen Single Edged Razor Blades.

H1a.  Extra keen Single Edged Razor Blades.

Blue steel blades, very , very sharp

find out more

0.30

B13. Solarfilm Litespan

B13. Solarfilm Litespan

Light plastic film covering for models 18" upwards. Apply with Balsaloc (A19). Sheet size 20" x 36"

find out more

3.65

F2. Rubber Strip 045 to 085

F2. Rubber Strip 045 to 085

Elastic rubber strip to power model aeroplanes

find out more

2.95

A12. Deluxe TISSUE Paste

A12.  Deluxe TISSUE Paste

50ml squeezy bottle

find out more

4.85

SAMS Models NEW 2014 Catalogue & Handbook. Great Britain

SAMS Models  NEW 2014  Catalogue & Handbook. Great Britain

Fully updated for 2014

For the Catalogue Order only Please Note. This price includes postage. Due to an anomoly in our
software, we are unable to get the system to exclude this item from our minimum shipping charge which is
£5.50 Please place your order via either PayPal or Credit Card, we will refund PayPal the overpaid shipping and we can adjust the amount taken on a credit card to exclude the additional postage.

find out more

5.95

B4. Esaki Jap Tissue

B4. Esaki Jap Tissue

Genuine Jap tissue. Without question the best lightweight tissue available. Very light, very strong. Great wet strength. 7 colours available. Sheet size 18 x 24 inches

See also Catalogue number B4a. Bulk value packs

find out more

1.65

B7. Peck Polymer tissue

B7. Peck Polymer tissue

Medium weight colour fast tissue suitable for indoor and outdoor models. Sheet size 20" x 30"

find out more

0.90

spacer

AEROGRAPHICS KITS

SAMS Model Catalogue | General Scale Kits and Sport models |  AEROGRAPHICS KITS

G320. D.H.C. Chipmunk 21G320. D.H.C. Chipmunk 21"
Designed in Canada in 1945. The standard basic trainer for
the RAF into the 1980’s. Thousands of air cadets learnt to fly in a chippy.
Supplied with rubber. Easily converted to electric, KP01.
Comes complete with canopy and decal roundels.


Price: 22.95



G321. Auster J4. 23G321. Auster J4. 23"
The Auster family of light aircraft were made in the UK and
performed a useful role in WW2 in Army Observation duties. After the
war they were a popular light plane . 23" span, this model is ideal for
conversion to the KP01 electric Motor. A seperate set of decals is avail-
able see section J, J141.



Price: 21.95



G322. D.H. Moth MinorG322. D.H. Moth Minor
Designed in 1937, many are still flying today. The
model is suitable for rubber or electric. 24". Supplied with
roundel decals.



Price: 21.95



G325. Curtiss JN-4 Jenny. 26G325. Curtiss JN-4 Jenny. 26"
Famous WW1 American trainer. After WW1 the aircraft
achieved great fame in the barnstoming heydays of the 20’s. The model
is very light and can be converted to the KP01
Electric motor. Supplied with WW1 American star and Flying Circus decals.



Price: 28.95



G327. 1913 Eastbourne Monoplane. 19G327. 1913 Eastbourne Monoplane. 19"
Our little model is a really great performer and an
ideal subject for anyone wanting to try an undercambered wing. The aircraft
featured in an article in a 1913 edition of "Flight" magazine, now the "Aeroplane"
magazine. The original was not seen again after the first world war, no one
know where it went. Model flies well on electric. We even put single
channel r/c in ours.



Price: 21.95



G332. B.A.C. Lightning Mk6. 12G332. B.A.C. Lightning Mk6. 12"
Entered RAF service in 1960. RAF’s main intercepter
fighter during the cold war years until 1988. The model has been designed for
Rapier (L2HP) or Jet-X (50) power. This scale model can also be flown on rubber
or launched as a catapault glider.



Price: 21.95



G333. Me 163 Komet. 16G333. Me 163 Komet. 16"
A Rapier or Jet-X powered version of the famous WW2 German
Rocket plane. Can also be flown as a glider.



Price: 21.95



G334. Fairey Swordfish. 25G334. Fairey Swordfish. 25"
First flown in 1934. This aircraft was the mainstay fleet torpedo
bomber of the British Navy during WW2. Our model is based on the aircraft still
flying with the Royal Navy Historic Flight. This glorious model was designed to be
flown on electric (KP01) or rubber.



Price: 38.95



G335. 1912 Blackburn Monoplane. 22 1/2G335. 1912 Blackburn Monoplane. 22 1/2"
The oldest flying aircraft on the British register. Based on the machine at the Shuttleworth collection at Old Warden. The model comes complete with pilot, rigging and clear vac formed dummy spoked wheels. Clear installation instructions for rubber, or electric power.



Price: 22.95



G336. Fokker E3 Eindecker. 21 1/2G336. Fokker E3 Eindecker. 21 1/2"
First aircraft with an interrupter gear to allow the gun to
shoot through the propellor arc. Our model has quality printwood and strip, clear
plan and building instructions plus Pilot, rigging elastic, vac formed wheels and a
simply huge sheet of Decals. Rubber is supplied but easy conversion to
electric is given.



Price: 23.95



G337. Avro 504. 22G337. Avro 504. 22"
First flew in 1913! There followed twenty years of service with the RFC,
later the RAF as a basic trainer, right up to the beginning of the second world war.
All the usual goodies expected of AG kits including roundels and tail flash decals.
Suitable for KP01 or rubber.



Price: 28.95



G338. Lacey M10. 20G338. Lacey M10. 20"
Kit design by Andy Sephton (chief pilot at Shuttleworth) this is a model
of an unusual 1960s American homebuilt aircraft. The kit is produced with the scale
beginner in mind. Powered by rubber, it can be easily converted to Electric
and there is plenty of room for lightweight r/c.



Price: 22.95



G339. Gloster Gladiator. 21 1/2G339. Gloster Gladiator. 21 1/2"
This very popular model is based on the aircraft still flying at
Old Warden as part of the Shuttleworth collection. The Gladiatior is still famous
after 60 years for the stout defence of Malta during WW2. Another great kit from
the pen of consumate British modeller, David Deadman. The box is simply stuffed
with goodies: 3 different sets of mouldings, clear canopy, sheets of printwood plus
roundel and tail flash decal sheet. Ideal for KP01 electric.



Price: 38.95



G340. Fairey Firefly. 24.8G340. Fairey Firefly. 24.8"
WW2 fleet fighter reconnaissance aircraft. Our model is based on
the aircraft that flew with the Royal Navy Historic Flight. The usual high standard
of kitting with plastic mouldings and roundel decals. Suitable for coversion to or electric (KP01).



Price: 31.95



G341. Luton Minor. 20G341. Luton Minor. 20"
This pretty rendition of the famous British homebuilt of the 30’s
is easy to build and flies very well. Powered by rubber it is also ideal for the
GM63 Co2 motor.



Price: 22.95



G342. Bell XS-1. 13G342. Bell XS-1. 13"
The first aircraft to break the sound barrier. Inspired by the Rapier L2
this is another great design from Richard Crossley.Well tested during the 2000
flying season, this one flew straight off the board. Its a thrill! News update. General Chuck Yeager has one of these kits!



Price: 21.95



G343. 1928 Velie Monocoupe. 21G343. 1928 Velie Monocoupe. 21"
Velie Monocoupe. The first American light plane with fully enclosed cabin.
This elegant version was designed by David Deadman and is suitable for Rubber,
Co2 (GM120) or electric (KP01) A very stable flier suitable for beginners.



Price: 28.95



G344. Hawker Hunter. 20G344. Hawker Hunter. 20"
First flown in 1953. A popular fighter with the RAF and one of
the best looking aeroplanes ever designed. Many are still flying in private hands.
The model designed by John Watters to use the KP electric ducted fan. Remember
to put your name and address on the model!



Price: 31.95



G345. Comper Swift. 26G345. Comper Swift. 26"
Over 40 were built. A glorious example of this famous racer, currently
based at Old Warden. Build either the pobjoy or Gypsy version, both are shown on
the plan. Suitable for Rubber, or electric (KP01) there is simply loads of
space in the fuselage for micro r/c . Drawn by Adrian Britton.



Price: 31.95



G346. Fw226 Flitzer. 13G346. Fw226 Flitzer. 13"
Another great model from Richard Crossley, designer of the
Komet and Bell kits. This was a top secret German Jet design from WW2
that didn’t get into service. The model prototype was extensively tested
during the 2001 season and uses the Rapier L2 motor.



Price: 21.95



G347. Slingsby Kadet/Tutor. 25 or 30G347. Slingsby Kadet/Tutor. 25 or 30"
Phil Smith’s replica vintage design of this very popular
glider. How many air cadets first took to the air in one of these? Build either
model from the kit, the 25” Kadet or the 30” Tutor. Perfect for complete beginners.



Price: 21.95



G348. Sopwith Triplane. 22G348. Sopwith Triplane. 22"
Another great kit from the pen of John Watters. Not really
suitable for rubber although it might work, there, a challenge perhaps? We
suggest electric (KP01) .The prototype was in the top
four in the 2002 Eddie Riding trophy. Another model based on the real machine from the Shuttleworth Collection at Old Warden.



Price: 31.95



G349. Desoutter Mk1. 30G349. Desoutter Mk1. 30"
Free Flight or lightweight r/c, this is another super kit from Adrian
Britton who also designed our Firefly and Comper kits. Full decal set included.
This large model is ideal for the beginner, suitable for either freeflight or lightweight radio control. 




Price: 31.95



G4025. Percival Mew Gull. 26 1/2G4025. Percival Mew Gull. 26 1/2"
A great kit of this famous racing aircraft from the 1930’s.
Prototype placed in the 2002 Eddie Riding trophy on rubber, also suitable for
conversion to electric (KP01). Another fine design from Adrian
Britton.



Price: 38.95



G4026. Sukhoi SU-11. 10G4026. Sukhoi SU-11. 10" wingspan
Latest addition to Aerographics range. Suitable for Rapier L2 or L2HP

Price: 21.95



G4027. Mig 21. 10G4027. Mig 21. 10"
For Rapier L2/L2HP Jet motor. Kit includes, removable print sheet wood, strip wood and block, coloured tissue. Canopy, decals and motor tube

Price: 21.95



G4028. Sopwith Camel. 21G4028. Sopwith Camel. 21"
David Causers 21" Scale competition model in kit form. 10 seperate aser cut balsa
and ply sheet parts, Moulded cowl, Full Colour decals, Extensive plans and
drawings plus 8 page building instructions. Designed for electric or Co2

Price: 49.95



G4030. Hawker Sea Hawk. 18G4030. Hawker Sea Hawk. 18"
Laser cut replica of the Phil Smith 50' design. Redrawn for Aerographics
by Phil in 2002. For Jet-X 50 or Rapier L2HP

Price: 26.95



G4032. Republic Thunderjet. 18G4032. Republic Thunderjet. 18"
Laser cut version of the Phil Smith 50's design re drawn for Aerographics
by Phil in 2002. 18" span for Jet-X 50 or Rapier L2HP


Price: 26.95



G4034. RAF SE5a.  18G4034. RAF SE5a. 18" Span
Leightweight rubber model. Lassr cut parts.

Price: 37.95



G4035. RAF SE5a. 27G4035. RAF SE5a. 27" Super Jumbo Scale
Fly it rubber free flight or convert to full radio control. Huge wing area.

Price: 48.95



G4036. P51B Mustang Razorback. 32G4036. P51B Mustang Razorback. 32" r/c version
Full laser cut kit with 'B/C' canopy. For elecric radio control

Price: 63.95



G4037. P51D Mustang . 32G4037. P51D Mustang . 32" r/c version
Supplied with 'D' Bubble canopy. Full laser cut kit

Price: 63.95



G4038. P51B Mustang, Razorback . 32G4038. P51B Mustang, Razorback . 32" Ruber version
Includes rubber pack for Jumbo rubber scale

Price: 63.95



G4039. P51D Mustang. 32G4039. P51D Mustang. 32" Rubber version
Includes rubber pack for Jumbo rubber scale. Free flight version

Price: 63.95



G4040. Fokker D7. 22G4040. Fokker D7. 22"
Full laser cut kit includes balsa and basswood strip, hardware and full
decals. Coloured tissue etc.

Price: 49.95



G4041. Albatross D3. 22 1/2G4041. Albatross D3. 22 1/2"
Full kit as per the Fokker, includes moulded spinner.

Price: 48.95



G4042. Miles Magister. 29G4042. Miles Magister. 29"
Suitable for either Electric r/c or Jumbo rubber scale. Complete kit.

Price: 48.95



G4043. Mitsubishi A6M5 ZERO 27G4043. Mitsubishi A6M5 ZERO 27"
Laser cut kit for jumbo rubber or electric radio control. Contents
include. Laser cut sheetwood, strip and hardware, huge plan, decals,
and coloured tissue.

Price: 53.00



G4044. North American X-15 Rocket Plane. 7G4044. North American X-15 Rocket Plane. 7"
Designed by Steve Bage for the Rapier L1 motor. Simple unusual construction, great flyer

Price: 16.95



G4045, Fokker Dr1 Triplane. 23.6G4045, Fokker Dr1 Triplane. 23.6"
Fully laser cut parts, multicoloured tissue, colour sheet, 3 view, huge plan,
comprehensive building instructions. Suitable for either jumbo rubber or
electric free flight or radio control

Price: 52.95



G4046. F86 Sabre. 18G4046. F86 Sabre. 18"
Phill Smith's iconic 1950's design redrawn for Aerographics by Phill in 20002. Suitable for
either Rapier L2 or Jet-X power. Laser cut parts, full kit includes water slide decals

Price: 26.95



G4047. De Havilland D.H.2.  28G4047. De Havilland D.H.2. 28"
Aerographics kit number 40. 7 Laser cut wood panels, quality strip, hardware , huge plan , building instructions and large waterslide decal sheet.

Price: 55.95



G4048. D.H. Tiger Moth. 29G4048. D.H. Tiger Moth. 29"
Jumbo scale free flight rubber or electric or electric radio control. Very scale model
includes laser cut sheet parts, stripwood, tissue rubber prop, hardware etc

Price: 61.95



G.4049 Piper J3 Cub. Rubber 35-1/2G.4049 Piper J3 Cub. Rubber 35-1/2"
35-1/2" inch span for rubber power. This version comes complete with rubber , large prop , shaft and nose button. Laser cut parts. Tissue for Military and Civil versions

Price: 43.95



G.4050. Piper Cub. Electric 35-1/2G.4050. Piper Cub. Electric 35-1/2"
35-1/2" for Electric power. Easy to convert to lightweight radio. Laser cut parts

Price: 39.95



G.405I  Beagle Husky 21-1/2  Laser Cut PartsG.405I Beagle Husky 21-1/2 Laser Cut Parts
Pretty High Wing Monoplane. Indoor or outdoor use. Simple construction features laser cut parts.

Price: 29.95



G4052 Beagle Husky. 21-1/2 Printed  VersionG4052 Beagle Husky. 21-1/2 Printed Version
As per 5041 but with printed bals panels instead of laser cut.

Price: 19.95



G4053. F.W. 190.  26G4053. F.W. 190. 26"
Laser Cut parts, Coloured tissue, Canopy & Wheels etc
Specify if rubber pack required

Price: 53.00



SAMS Model Catalogue | General Scale Kits and Sport models |  AEROGRAPHICS KITS

spacer
spacer