SAMS Model Catalogue

View Basket | Checkout | Items:, Value:

Product Sections

spacer
spacer

Store Information

spacer
spacer

Best Sellers

C9. 1/32 Nose Button

C9. 1/32 Nose Button

Pack of 6 nylon nose buttons for 1/32" wire

find out more

£2.50

F5. Rubber Strip 187 (3/16")

F5. Rubber Strip 187 (3/16

find out more

£3.35

A14. Humbrol Balsa Cement. 24ml tube

A14. Humbrol Balsa Cement. 24ml tube

find out more

£2.99

H15. Pin Clamps. Pack 28

H15. Pin Clamps. Pack 28

These are probably the most popular item we sell. Allows
you to hold wood in place without putting pins through the
wood. Packet of 28. Use with H17 below.

find out more

£2.00

A. 10. Rubber Lube. 28.35gms

A. 10. Rubber Lube. 28.35gms

A small pot of rubber motor lubricant

find out more

£1.95

H17. ‘T’ Pins. Box 100

H17. ‘T’ Pins. Box 100

Box of 100 ‘T’ headed pins ideal for use with the H15 clamps.

find out more

£3.00

F4. Rubber Strip 093 to 125

F4. Rubber Strip 093 to 125

Elastic rubber strip to power model aeroplanes

find out more

£3.00

F2. Rubber Strip 045 to 085

F2. Rubber Strip 045 to 085

Elastic rubber strip to power model aeroplanes

find out more

£2.80

SAMS Models NEW 2012 Catalogue & Handbook. Great Britain

SAMS Models NEW 2012 Catalogue & Handbook. Great Britain

Fully updated for 2012 with 100's of new pictures and illustrations.

For the Catalogue Order only Please Note. This price includes postage. Due to an anomoly in our
software, we are unable to get the system to exclude this item from our minimum shipping charge which is
£4.75. Please place your order via either PayPal or Credit Card, we will refund PayPal the overpaid shipping and we can adjust the amount taken on a credit card to exclude the additional postage.

find out more

£5.00

B4. Esaki Jap Tissue

B4. Esaki Jap Tissue

Genuine Jap tissue. Without question the best lightweight tissue available. Very light, very strong. Great wet strength. 7 colours available. Sheet size 18 x 24 inches

See also Catalogue number B4a. Bulk value packs

find out more

£1.55

spacer

Section E. Propellors

SAMS Model Catalogue | Section E. Propellors

E0. 4E0. 4" Plastic for Rubber


Price: £0.95


E1. 4 3/4E1. 4 3/4" Plastic for rubber


Price: £1.00


E2. 6E2. 6" Plastic for rubber


Price: £1.00


E3. 7E3. 7" Plastic for rubber


Price: £1.35


E4. 8E4. 8" Plastic for rubber


Price: £1.15


E5. 9 1/2E5. 9 1/2" Plastic for rubber
Suitable for P30 Class


Price: £1.45


E10. 6E10. 6" Plastic including hub assembly for rubber


Price: £1.40


E18. Peck designer kit smallE18. Peck designer kit small
Props, buttons shafts and washers. 4 3/4" & 6" props


Price: £5.90


E19. Peck designer kit largeE19. Peck designer kit large
As per E18 but with 7" & 9 1/2" props

Price: £6.90


E22. 9E22. 9" 3 Blade plastic for Co2 & Rubber
Suitable for GM300 motor

Price: £3.75


E22b. 9E22b. 9" Plastic for Co2 & Rubber


Price: £3.50


E24. 5 1/2E24. 5 1/2" Plastic for electric
KP01 prop

Price: £0.90


E66. 6E66. 6" Tractor plastic prop for electric
For KP02

Price: £0.90


E67. 6E67. 6" Pusher plastic prop for electric
For KP02

Price: £0.90


E69. 7E69. 7" Pusher plastic prop for electric
For kP02

Price: £0.90


E68. 7E68. 7" Tractor plastic prop for electric
For KP02

Price: £0.90


E98. 5 1/2E98. 5 1/2" plastic for Co2/electric


Price: £0.65


E112. 7E112. 7" 4 blade plastic prop for rubber or Co2


Price: £3.95


E116. 10 7/8E116. 10 7/8" Plastic wide blade prop


Price: £3.60


E1171. 85 dia x 60 pitch black plastic 2,3 or 4 blade. 1mm holeE1171. 85 dia x 60 pitch black plastic 2,3 or 4 blade. 1mm hole
For KP00 ungeared

Price: £1.05


E1172. 85 dia x 45 pitch white plastic 2,3 or 4 blade 2mm holeE1172. 85 dia x 45 pitch white plastic 2,3 or 4 blade 2mm hole
For KP00 geared

Price: £1.05


E1173. 85 dia x 60 pitch black plastic 2,3 or 4 blade 2mm holeE1173. 85 dia x 60 pitch black plastic 2,3 or 4 blade 2mm hole
For KP00 geared

Price: £1.05


E1174. 96mm dia x 60 pitch white 2 blade prop for electric 2mm holeE1174. 96mm dia x 60 pitch white 2 blade prop for electric 2mm hole
For KP00 geared

Price: £1.05


E1175. 96 dia x 70 pitch black plastic 2 blade prop for electric. 2mm holeE1175. 96 dia x 70 pitch black plastic 2 blade prop for electric. 2mm hole
For KP00


Price: £1.05


E126. 5 3/4E126. 5 3/4" Butterfly Indoor prop assembly for rubber
For Ikara Butterfly or other small indoor models. Includes fittings

Price: £1.80


E129. 12E129. 12" Plastic Penny Plane Indoor prop
For Ikara Bulldog Penny Plane. Includes fittings

Price: £2.55


E130. 4 1/4E130. 4 1/4" Kolibri Indoor Prop
For Ikara Kolibri. Includes fittings

Price: £1.80


E131. 7E131. 7" Hanger Rat prop assembly.
Includes hanger

Price: £3.00


E132. 9 1/2E132. 9 1/2" Ikara P30 plastic prop
Includes adjustable thrust line device

Price: £5.05


E135. KP Prop 104 x 75mmE135. KP Prop 104 x 75mm
2mm hole. 2,3 or 4 blade folding. Developed for the KP Double 00

Price: £1.05


E136. KP Prop 116 x 90mmE136. KP Prop 116 x 90mm
2mm hole. 2,3 or 4 blade folding. For KP Double 00

Price: £1.05


E137. KP prop 137 x 115mmE137. KP prop 137 x 115mm
2mm hole. 2,3 or 4 blade folding

Price: £1.55


E138. KP Prop 149 x 130E138. KP Prop 149 x 130
2mm hole. 2,3 or 4 blade. Folding

Price: £1.55


E139. 9E139. 9" Square tip. 1 1/4" Blade for rubber


Price: £1.25


E140. 4E140. 4" Red square tip for rubber
Very light prop


Price: £0.85


E141. 4 3/4E141. 4 3/4" Black. Round tip for rubber


Price: £0.75


E142. 6E142. 6" Blue. Round tip for rubber


Price: £0.85


E143. 7E143. 7" Blue. Round tip for rubber


Price: £0.95


E144. 8E144. 8" Blue. Round tip for rubber


Price: £1.00


E145. 9 E145. 9 " Blue. Round tip for rubber


Price: £1.15


E146. 5E146. 5" Black PUSHER for rubber


Price: £1.30


E147. 9 1/2E147. 9 1/2" Hardwood for rubber
Very light wooden prop


Price: £5.05


Finished RTF Balsa Props - 3Finished RTF Balsa Props - 3" to 7"
Finished Balsa Rubber Props 
This range of props are completely finished and ready to use. They are expensive!!
However, much work has been put into their manufacture and finishing and we think
they are worth every penny. Each of these props is hand made to order so do please
2 - 3 weeks for delivery.

The props are hand carved from highest quality balsa or laminated sheets. They come
fully formed, sanded and finished with several coats of dope. The hole for the prop shaft
is 1/16" and can be used with a 1/16 alloy or brass tube for a 1/32 shaft. The hole can be
enlarged to accept tubes for either 3/64 or 1/16" shafts. The props come in 3 pitch/
diameter sizes. P/Da is for 1.1/1 scale models. P/Db is 1/25/1 for climbing sport models,
P/Dc is 1.5/1 for proven stable sport models. 

Price: £19.95

Balsa Prop



Finished Balsa Prop - 8Finished Balsa Prop - 8"
Finished Balsa Rubber Props 
This range of props are completely finished and ready to use. They are expensive!!
However, much work has been put into their manufacture and finishing and we think
they are worth every penny. Each of these props is hand made to order so do please
2 - 3 weeks for delivery.

The props are hand carved from highest quality balsa or laminated sheets. They come
fully formed, sanded and finished with several coats of dope. The hole for the prop shaft
is 1/16" and can be used with a 1/16 alloy or brass tube for a 1/32 shaft. The hole can be
enlarged to accept tubes for either 3/64 or 1/16" shafts. The props come in 3 pitch/
diameter sizes. P/Da is for 1.1/1 scale models. P/Db is 1/25/1 for climbing sport models,
P/Dc is 1.5/1 for proven stable sport models. 

Price: £20.95

Finished Balsa Props



Finished Balsa Props - 9 Finished Balsa Props - 9 "
Finished Balsa Rubber Props 
This range of props are completely finished and ready to use. They are expensive!!
However, much work has been put into their manufacture and finishing and we think
they are worth every penny. Each of these props is hand made to order so do please
2 - 3 weeks for delivery.

The props are hand carved from highest quality balsa or laminated sheets. They come
fully formed, sanded and finished with several coats of dope. The hole for the prop shaft
is 1/16" and can be used with a 1/16 alloy or brass tube for a 1/32 shaft. The hole can be
enlarged to accept tubes for either 3/64 or 1/16" shafts. The props come in 3 pitch/
diameter sizes. P/Da is for 1.1/1 scale models. P/Db is 1/25/1 for climbing sport models,
P/Dc is 1.5/1 for proven stable sport models. 

Price: £21.95

Finished Balsa Props 9"



Finished Balsa Props - 10Finished Balsa Props - 10"
Finished Balsa Rubber Props 
This range of props are completely finished and ready to use. They are expensive!!
However, much work has been put into their manufacture and finishing and we think
they are worth every penny. Each of these props is hand made to order so do please
2 - 3 weeks for delivery.

The props are hand carved from highest quality balsa or laminated sheets. They come
fully formed, sanded and finished with several coats of dope. The hole for the prop shaft
is 1/16" and can be used with a 1/16 alloy or brass tube for a 1/32 shaft. The hole can be
enlarged to accept tubes for either 3/64 or 1/16" shafts. The props come in 3 pitch/
diameter sizes. P/Da is for 1.1/1 scale models. P/Db is 1/25/1 for climbing sport models,
P/Dc is 1.5/1 for proven stable sport models. 

Price: £23.95

Finished Balsa Props - 10"



Finished Balsa Props - 11Finished Balsa Props - 11"
Finished Balsa Rubber Props 
This range of props are completely finished and ready to use. They are expensive!!
However, much work has been put into their manufacture and finishing and we think
they are worth every penny. Each of these props is hand made to order so do please
2 - 3 weeks for delivery.

The props are hand carved from highest quality balsa or laminated sheets. They come
fully formed, sanded and finished with several coats of dope. The hole for the prop shaft
is 1/16" and can be used with a 1/16 alloy or brass tube for a 1/32 shaft. The hole can be
enlarged to accept tubes for either 3/64 or 1/16" shafts. The props come in 3 pitch/
diameter sizes. P/Da is for 1.1/1 scale models. P/Db is 1/25/1 for climbing sport models,
P/Dc is 1.5/1 for proven stable sport models. 

Price: £24.95

Finished Balsa Props - 11"



Finished Balsa Props - 12Finished Balsa Props - 12"
Finished Balsa Rubber Props 
This range of props are completely finished and ready to use. They are expensive!!
However, much work has been put into their manufacture and finishing and we think
they are worth every penny. Each of these props is hand made to order so do please
2 - 3 weeks for delivery.

The props are hand carved from highest quality balsa or laminated sheets. They come
fully formed, sanded and finished with several coats of dope. The hole for the prop shaft
is 1/16" and can be used with a 1/16 alloy or brass tube for a 1/32 shaft. The hole can be
enlarged to accept tubes for either 3/64 or 1/16" shafts. The props come in 3 pitch/
diameter sizes. P/Da is for 1.1/1 scale models. P/Db is 1/25/1 for climbing sport models,
P/Dc is 1.5/1 for proven stable sport models. 

Price: £25.95

Finished Balsa Props - 12"



Finished Balsa Props - 13Finished Balsa Props - 13"
Finished Balsa Rubber Props 
This range of props are completely finished and ready to use. They are expensive!!
However, much work has been put into their manufacture and finishing and we think
they are worth every penny. Each of these props is hand made to order so do please
2 - 3 weeks for delivery.

The props are hand carved from highest quality balsa or laminated sheets. They come
fully formed, sanded and finished with several coats of dope. The hole for the prop shaft
is 1/16" and can be used with a 1/16 alloy or brass tube for a 1/32 shaft. The hole can be
enlarged to accept tubes for either 3/64 or 1/16" shafts. The props come in 3 pitch/
diameter sizes. P/Da is for 1.1/1 scale models. P/Db is 1/25/1 for climbing sport models,
P/Dc is 1.5/1 for proven stable sport models. 

Price: £26.95

Finished Balsa Props - 13"



Finished Balsa Props - 15Finished Balsa Props - 15"
Finished Balsa Rubber Props 
This range of props are completely finished and ready to use. They are expensive!!
However, much work has been put into their manufacture and finishing and we think
they are worth every penny. Each of these props is hand made to order so do please
2 - 3 weeks for delivery.

The props are hand carved from highest quality balsa or laminated sheets. They come
fully formed, sanded and finished with several coats of dope. The hole for the prop shaft
is 1/16" and can be used with a 1/16 alloy or brass tube for a 1/32 shaft. The hole can be
enlarged to accept tubes for either 3/64 or 1/16" shafts. The props come in 3 pitch/
diameter sizes. P/Da is for 1.1/1 scale models. P/Db is 1/25/1 for climbing sport models,
P/Dc is 1.5/1 for proven stable sport models. 

Price: £29.95

Finished Balsa Props - 15"



Finished Balsa Props - 17Finished Balsa Props - 17"
Finished Balsa Rubber Props 
This range of props are completely finished and ready to use. They are expensive!!
However, much work has been put into their manufacture and finishing and we think
they are worth every penny. Each of these props is hand made to order so do please
2 - 3 weeks for delivery.

The props are hand carved from highest quality balsa or laminated sheets. They come
fully formed, sanded and finished with several coats of dope. The hole for the prop shaft
is 1/16" and can be used with a 1/16 alloy or brass tube for a 1/32 shaft. The hole can be
enlarged to accept tubes for either 3/64 or 1/16" shafts. The props come in 3 pitch/
diameter sizes. P/Da is for 1.1/1 scale models. P/Db is 1/25/1 for climbing sport models,
P/Dc is 1.5/1 for proven stable sport models. 

Price: £32.95

Finished Balsa Props - 17"



Finished Balsa Props - 18Finished Balsa Props - 18"
Finished Balsa Rubber Props 
This range of props are completely finished and ready to use. They are expensive!!
However, much work has been put into their manufacture and finishing and we think
they are worth every penny. Each of these props is hand made to order so do please
2 - 3 weeks for delivery.

The props are hand carved from highest quality balsa or laminated sheets. They come
fully formed, sanded and finished with several coats of dope. The hole for the prop shaft
is 1/16" and can be used with a 1/16 alloy or brass tube for a 1/32 shaft. The hole can be
enlarged to accept tubes for either 3/64 or 1/16" shafts. The props come in 3 pitch/
diameter sizes. P/Da is for 1.1/1 scale models. P/Db is 1/25/1 for climbing sport models,
P/Dc is 1.5/1 for proven stable sport models. 

Price: £35.95

Finished Balsa Props - 18"



SAMS Model Catalogue | Section E. Propellors

spacer
spacer